Multiphase Electric

Top 5 whole-house generator installers in Portland

Vitaliy Borkin 6 min read

A standby generator is only as good as the install behind it. Here are five Portland-area companies that do this work, including us, with what each one actually offers and how to check it for yourself.

Meter, two Generac transfer switches and a gutter box on a lap-sided wall, with a standby generator on the driveway beside them

A whole-house generator is a transfer switch, a gas line, a pad, a permit and a maintenance schedule, with a generator attached. The unit on the pad is much the same from one installer to the next. The work around it is not, and that is what you are choosing when you choose an installer.

How we put this list together

Every company here installs whole-house standby generators in the Portland metro, says it is an authorized Generac dealer, and services what it installs. We left off lead-generation sites and directories that pass your request to whoever pays for it.

Two things to be upfront about. We are on this list, and we put ourselves first because it is our blog; the other four are in no particular order. And everything about the other companies comes from their own websites, as of November 2026. We have not hired them or audited their work. Treat each listing as a starting point, and check the license and dealer status yourself before you sign anything (how to do that is at the end).

1. Multiphase Electric

Based in: Portland · Licensed since: 2005 · CCB #162827

We are an electrical contractor first, and a Generac dealer and certified installer. A generator is part of our backup power work, alongside the panel and service upgrades that a generator often turns up, so if the load calculation shows the service itself needs work, the same crew does both.

  • What we install: whole-home and critical-circuit standby generators, portable generator inlets and interlocks, and battery backup.
  • How we size: from a load calculation of what has to stay on, not from square footage.
  • After the install: annual maintenance on what we install and on Generac units others installed.
  • Good fit if: the generator is part of a bigger electrical picture — a panel that’s already full, an EV charger, a heat pump, or a remodel.

2. Oregon Generators

Based in: Clackamas · CCB #249864

A generator specialist rather than a general electrical shop. The company describes itself as holding Generac’s Premier Power Pro ranking and specializes in Generac and Kohler.

  • What they install: turnkey installs including permits, gas piping and inspections, propane tank installation, and battery backup (Tesla Powerwall and FranklinWH).
  • After the install: maintenance plans by factory-trained technicians.
  • Service area: Multnomah County, eastern Washington County, northern Clackamas County, and southern Clark County in Washington.
  • Good fit if: you want a shop where generators are the main business, or you’re weighing Kohler alongside Generac.

3. Roth

Offices in: Portland, Aurora, Bend and Sisters · CCB #14008

A larger home-services company that also does heating and cooling, plumbing, drains and garage doors. Roth says its generator team has served Portland since 1976, and it installs Generac and Kohler.

  • What they install: standby generators, with 14 kW and 24 kW units given as the typical essential-circuit and whole-home sizes.
  • After the install: a Generator+ plan listed at $899 a year, with yearly service and remote monitoring; 24/7 emergency support is advertised.
  • Good fit if: you’d like one company for the generator and the rest of the house’s mechanical systems, or you want monitoring as part of a plan.

4. Bridgetown Electric

Based in: North Portland · Locally owned since: 1994 · CCB #103824

An electrical contractor and official Generac dealer under second-generation local ownership.

  • What they install: Generac generator installation, maintenance and repair, alongside general electrical work.
  • Warranty: a one-year workmanship warranty on top of Generac’s manufacturer warranty.
  • Good fit if: you want a long-established local electrical shop on the north side of the city.

5. Paramount Electric Co.

Based in: Portland metro, serving Oregon and SW Washington · Founded: 2011

An authorized Generac dealer, installer and service company, licensed in both Oregon and Washington.

  • What they install: Generac standby generators, from essential-circuit setups around 10–14 kW to whole-home units of 20 kW and up.
  • After the install: annual maintenance, including exercise-cycle checks and transfer switch testing.
  • Service area: the Portland metro from Hillsboro to Gresham and Oregon City, and Vancouver, Camas, Ridgefield and Battle Ground in Washington.
  • Good fit if: you’re on the Washington side of the river, or you own property on both sides.

What separates a good installer from the rest

Whoever you call, the same handful of questions sorts the careful installers from the ones selling a box. We go through the expensive mistakes in more detail in five costly generator buying mistakes, but the short version:

  • Do they run a load calculation? A quote sized from square footage alone is a guess. Ask what the calculation assumes is running.
  • Have they checked the gas meter? A whole-home generator at full load can use as much gas as the rest of the house combined. If the meter is too small, NW Natural has to upsize it, and that belongs on the schedule from day one.
  • Is the transfer switch named and sized? Whole house or a subpanel, automatic or manual, and whether load management sheds big appliances when the generator nears its limit.
  • Is the permit included? A generator is permitted electrical and gas work in Oregon. An installer who offers to skip it is offering you a problem at resale and at claim time.
  • Who services it afterwards? Starting batteries, oil and plugs are what fail. A generator nobody has looked at in four years is not a backup plan.

How to check any installer yourself

  • Contractor license: search the company on the Oregon Construction Contractors Board’s license lookup. It shows whether the license is active, the bond and insurance, and any complaints. Generator work also needs an electrical license, held through the state Building Codes Division.
  • Dealer status: Generac’s own dealer locator, at generac.com, lists authorized dealers by ZIP code. A dealer badge on a website is a claim; the locator is the confirmation.
  • Warranty terms: read who is allowed to install and register the unit for the warranty to hold, before you choose who installs it.
  • Two or three written quotes: compare them line by line, not by the total. The cheapest quote is often the one that leaves the gas work, the permit or the pad off the page.

The short version

Most Portland-area installers are setting the same Generac units. What differs is the work around them: the sizing, the gas, the transfer switch, the permit and the service afterwards. Choose on those, check the license and dealer status yourself, and get it in writing.

If you’d like us to be one of your quotes, we size, install and service backup power across the metro, and we’ll tell you which setup your house actually needs before you buy anything.

More on this work: Generators & Backup Power

request your free estimate

Step 1. What can we help you with? It takes about two minutes.

What you need
Project Type

Questions? Call (503) 908-1593