Lake Oswego lighting & controls design
Lighting layouts, fixtures, and Lutron RadioRA 3 controls for Lake Oswego homes and businesses, designed and installed on one contract, with the Energy Trust incentive applied for on qualifying commercial upgrades.
What's included in a Lake Oswego lighting project
Most of a lighting project is settled before anything is ordered: where the fixtures go, what dims together, and where the keypads and sensors sit. We draw those together, so the wiring and the controls go in once rather than being moved after the walls are closed.
Lighting layouts & fixture selection
Recessed, pendant, under-cabinet, wall, and exterior lighting placed from how each room is used, with a fixture schedule to match. When an architect or designer has already drawn the space, we work from their plans.
Lutron RadioRA 3 systems
As a Certified Lutron RadioRA 3 Installer we design, install, and program dimming, keypads, scenes, schedules, automated shades, and app control, for a single room or the whole property.
New construction & remodels
Fixture and control locations are fixed before the drywall goes up and wired at rough-in, alongside the rest of the house's electrical work.
Commercial LED retrofits
Fluorescent and HID fixtures replaced with long-life LED in offices, retail, and medical space, done in sections or after hours as part of our commercial work in Lake Oswego.
Energy Trust incentives
As an Energy Trust of Oregon trade ally we survey the existing lighting, apply for pre-approval before work starts, and file the paperwork, so the incentive is already in the price you approve.
Energy-code controls & commissioning
Occupancy and daylight sensors and automatic shutoff for commercial spaces, installed, functionally tested, and documented ahead of the final inspection.
The full scope we take on in Lake Oswego:
- Lighting Design
- Lighting Layout Development
- Lighting Controls Design
- Smart Lighting Systems
- Lutron RadioRA 3 Systems
- Automated Lighting Scenes
- Automated Shades
- Keypad Controls
- App-Based Controls
- New Construction Lighting Design
- Remodel Lighting Design
- Commercial Lighting Upgrades (Energy Trust)
Why choose Multiphase Electric
- Designed before the walls close. The cheapest time to move a can light or add a keypad is while it is still a line on a drawing. We do the layout early, which is why the finished room does not need a lamp in the corner to make it work.
- Rebates filed for you. As an Energy Trust of Oregon trade ally we file the incentive paperwork ourselves, so the money is in the number you approve rather than a maybe afterwards.
- 40–60% less energy. Fluorescent and HID out, long-life LED in. On a typical commercial project the lighting bill drops by roughly half and stays there.
Licenses and certifications
- Energy Trust of Oregon — Certified trade ally
- Lutron RadioRA 3 — Certified installer
How a project runs
Lake Oswego lighting projects run through the same steps as the rest of our lighting work. The first two carry most of the weight, while a change is still only a line on a drawing.
-
Walk-through or drawing review
We start from how the space is used: where light needs to land, which fixtures dim together, and which scenes will actually get pressed. On a retrofit we also count the existing fixtures and their operating hours.
-
Layout and controls design
Fixture locations, dimming zones, and keypad and sensor locations are laid out together, and the fixture schedule is built from them.
-
Fixed written quote and incentive pre-approval
You receive a fixed price that lists the fixtures and the controls. For a qualifying commercial upgrade we apply to Energy Trust first, so the incentive is known before you sign.
-
Permit and install
We pull the electrical permit and schedule the install around your hours or your builder's. Occupied buildings are done in sections, after hours, or on weekends.
-
Programming, inspection, and handoff
Scenes and schedules are programmed, the controls tested, and the inspection passed. We file the incentive paperwork and walk you through the keypads and the app before we leave.
What a lighting project costs in Lake Oswego
Every project gets a fixed price after a walk-through or a look at the drawings, so these are typical ranges for the Portland metro rather than a quote. The fixtures you choose, the number of dimming zones and keypads, and whether the walls are open move the number most. The commercial range is before any Energy Trust incentive.
| Scope | Typical range | Timeline | Includes |
|---|---|---|---|
| Recessed lighting in a remodel | $200 – $450 per fixture | 1–2 days for a typical room | Layout, LED fixtures, wiring, dimmer, permit, and inspection. |
| Lutron RadioRA 3, a few rooms | $4,000 – $12,000 | 1–3 days on site | Processor, dimmers, and keypads for the main living spaces, scenes and schedules programmed, and app setup. |
| Whole-home Lutron RadioRA 3 | $15,000 – $45,000 | Spread over rough-in and trim-out | Lighting control throughout, keypads, shades where planned, programming, and commissioning. |
| Commercial LED retrofit | $150 – $450 per fixture | 1–5 days | New LED fixtures, lighting controls where required, and the Energy Trust incentive application. |
What our clients say
“I was referred to Multiphase Electric. We now use them from small changes, to our biggest projects. Clear communication, punctual, and guaranteed results. Highly recommend.”
“Really happy with these guys. We did a complete rewiring of the whole house and New panel. Leti is awesome running the office. Very responsive. Vitaliy, John and all the other Electricians were fantastic. They are pros! Highly recommend this company.”
“I have been a customer of Multiphase since 2007, I wouldn't think to go anywhere else they go above and beyond and nothing but Quality work, you definitely can go to bed knowing you were in safe hands, Dave and the whole team has been better than Good to me”
Lake Oswego and Clackamas County
We design and install lighting in Lake Oswego and across Clackamas County, and throughout the rest of the Portland metro, for homes and businesses alike. The crew and the process are the same wherever the project is.
Nearby in Clackamas County: Clackamas, Milwaukie, West Linn, Canby, Wilsonville, Molalla, Oregon City, Beavercreek, Damascus, Estacada and Sandy.
Lake Oswego lighting & controls design FAQs
Do you design and install lighting in Lake Oswego?
Yes. We design and install lighting and lighting controls for homes and businesses in Lake Oswego and the rest of the Portland metro, from the layout through programming and the final inspection.
What is Lutron RadioRA 3, and do I need it?
RadioRA 3 is Lutron's lighting control platform: scenes, dimming, keypads, automated shades, schedules, and app control across any number of rooms. Good lighting doesn't require it, but it is what lets one button set a whole room or turn the house off at night.
Can you add lighting controls to an existing home without opening walls?
Mostly, yes. RadioRA 3 is wireless, so its dimmers replace the existing switches in the same boxes, and battery-powered keypads can be mounted anywhere without new wiring. New fixture locations are what usually need access.
Do you handle the lighting design, or do I need a separate designer?
We do it in-house: layout, fixture selection, controls design, and the permit, so nothing gets lost between the drawing and the install. We also work alongside your architect or interior designer if you already have one.
When should lighting be planned on a new build or remodel?
Before the walls close, ideally while the drawings are still changing. Moving a recessed light or adding a keypad costs almost nothing on paper and a good deal once the drywall is up.
Are there rebates for commercial lighting upgrades in Lake Oswego?
Usually. Energy Trust of Oregon offers incentives for commercial LED and lighting control upgrades, based on fixture count, wattage savings, and controls. As a trade ally we work out what your project qualifies for and apply before work starts.
How much does a commercial LED retrofit cost in Lake Oswego?
Typically $150 to $450 per fixture before any Energy Trust incentive, depending on the fixtures and the controls the space needs. You get a fixed price, with the incentive shown, after we walk the space.
Can you upgrade lighting while our business stays open?
Yes. We work in sections, after hours, or on weekends, and a single-floor office or shop usually takes one to three days.
Who pulls the permit for lighting work?
We do, and we schedule the inspection. The fixtures, the controls, and the permit are on one contract, so there is no second contractor to coordinate.
About Multiphase Electric
Multiphase Electric LLC is a licensed and insured electrical contractor based in Oregon City, serving residential and commercial clients across the Portland metro since 2005. Reach us at (503) 908-1593, see our lighting & controls design page, or see every city we serve.
Keep looking: Lighting & controls design, Lighting & controls design in Portland, Commercial electrical services in Lake Oswego, Why your home still feels dark after adding more lights, and Everything we do in Lake Oswego.