Lake Oswego commercial electrical services
Commercial electrical work in Lake Oswego for offices, retail, restaurants, and medical space: tenant improvements, new construction, and service upgrades, priced from the drawings and finished with the closeout documents the building owner needs.
What's included in a Lake Oswego commercial project
We can carry the full electrical scope of a commercial job in Lake Oswego: power, lighting and controls, data cabling, and EV charging. Planning them together means one crew, one schedule, and one contact for the electrical side of the project.
Tenant improvements & remodels
Build-outs of vacant suites and remodels of occupied space. We price from the drawings, work alongside the other trades, and see the job through final inspection. See all of our commercial services.
New construction
The electrical scope of a new commercial building, from the service and distribution to the last device, coordinated with the general contractor from rough-in to final.
Service upgrades & three-phase power
Load calculations, larger services, panels, switchgear, and three-phase feeders, sized for the equipment the space will run rather than what it ran before.
Lighting, data & EV charging
Commercial lighting with the controls energy code requires, structured cabling, and EV chargers for staff and customer parking, installed with the power so the load and the pathways are planned once.
The full scope we take on in Lake Oswego:
- Commercial New Construction
- Tenant Improvements
- Commercial Service Upgrades
- Design-Build Electrical
- Plan & Spec Bidding
- Panel & Switchgear Installation
- Three-Phase Power Distribution
- Equipment & Machine Hookups
- Commercial Lighting & Controls
- Data & Low Voltage Systems
- Commercial EV Charging
- Permit & Inspection Coordination
Why choose Multiphase Electric
- One sub across the whole scope. Power, lighting and controls, data and low voltage, EV charging. One contract, one schedule, and nobody arguing about whose conduit that was supposed to be.
- Your date is the date. A TI that misses its date is rent on a space nobody can open yet, and a rough-in that misses its date pushes every trade behind it. We bid a date we can hold, and then we hold it.
- We work when you're closed. Shutdowns, changeovers, and anything that drops power get scheduled for nights or weekends where the work allows it, so the business does not lose a day to our crew.
Licenses and certifications
- Oregon CCB — Electrical contractor
- Energy Trust of Oregon — Certified trade ally
- Generac — Certified installer
How a project runs
Lake Oswego projects run through the same steps as the rest of our commercial work. The first three set most of the schedule, so we start them as early as the project allows.
-
Site walk and drawing review
We see the space and read the drawings before we price. A service that can't take the new load, equipment with a long lead time, or a missing pathway gets raised at this stage, when it costs least to solve.
-
Written scope and price
A written scope with a price and a timeline. For plan and spec work we bid the drawings as issued and price the alternates; for design-build we develop the electrical design with you before anything is ordered.
-
Permits and utility coordination
We pull the electrical permits for our scope. When the service changes, we run the load calculation and open the request with PGE early, because the utility's date usually sets the project's.
-
Rough-in alongside the other trades
We attend coordination meetings and work in sequence with the other trades. In an occupied building, shutdowns are planned with the tenant for nights or weekends where possible.
-
Trim, inspection, and commissioning
Devices, fixtures, gear, and lighting controls are installed and commissioned, and we book the inspections and meet the inspector on site.
-
Closeout
Updated panel schedules, as-built drawings, the inspection record, and warranty information, handed over at the end of the job.
What commercial electrical projects cost in Lake Oswego
Commercial work is priced from the drawings and a site walk, so these are typical ranges for the Portland metro rather than a quote. The size of the space, whether the existing service can carry the new load, and how much work has to happen after hours move the number most.
| Scope | Typical range | Timeline | Includes |
|---|---|---|---|
| Tenant improvement electrical | $8 – $18 / sq ft | 2–6 weeks | Power, lighting, and devices for the new layout, panel changes, permits, and inspections. |
| Service upgrade or three-phase service | $6,000 – $30,000 | 1–3 days on site, plus utility scheduling | Load calculation, new panel or switchgear, meter base, and coordination with the utility and plan review. |
| LED lighting retrofit | $150 – $450 per fixture | 1–5 days | New fixtures, lighting controls where required, and help with available utility rebates. |
| Level 2 EV charging | $7,000 – $15,000 per port | 1–3 days once equipment arrives | Dedicated circuits, charger mounting, load management where needed, and the permit. |
What our clients say
“I was referred to Multiphase Electric. We now use them from small changes, to our biggest projects. Clear communication, punctual, and guaranteed results. Highly recommend.”
“Really happy with these guys. We did a complete rewiring of the whole house and New panel. Leti is awesome running the office. Very responsive. Vitaliy, John and all the other Electricians were fantastic. They are pros! Highly recommend this company.”
“I have been a customer of Multiphase since 2007, I wouldn't think to go anywhere else they go above and beyond and nothing but Quality work, you definitely can go to bed knowing you were in safe hands, Dave and the whole team has been better than Good to me”
Lake Oswego and Clackamas County
We take commercial electrical projects in Lake Oswego and across Clackamas County, and throughout the rest of the Portland metro. The crew and the process are the same wherever the building is.
Nearby in Clackamas County: Clackamas, Milwaukie, West Linn, Canby, Wilsonville, Molalla, Oregon City, Beavercreek, Damascus, Estacada and Sandy.
Lake Oswego commercial electrical services FAQs
Do you take commercial electrical projects in Lake Oswego?
Yes. We handle tenant improvements, remodels, new construction, and service upgrades for commercial buildings in Lake Oswego and the rest of the Portland metro.
How much does commercial electrical work cost in Lake Oswego?
Tenant improvement electrical typically runs $8 to $18 per square foot, depending on the size of the space and how much is changing. Every job is priced from the drawings and a site walk.
When should we bring an electrician into the project?
While the drawings are still being finalized, if you can. Service size, equipment lead times, and utility coordination are easier and cheaper to solve before the schedule is fixed.
Do you work for general contractors or directly for owners?
Both. We work as the electrical subcontractor for general contractors, and directly for owners, tenants, and property managers.
Can the work be scheduled so our business stays open?
Yes. Anything that drops power to an occupied space is scheduled outside your hours wherever possible, and we tell you in advance when it can't be.
Do you install three-phase power and switchgear?
Yes: distribution panels, switchgear, transformers, three-phase feeders, and equipment connections, along with the load calculations and one-line diagrams plan review asks for.
Who pulls the permits on a commercial job?
We do, for our scope, and we schedule the inspections. At the end you receive the closeout package: panel schedules, as-builts, and the inspection record.
About Multiphase Electric
Multiphase Electric LLC is a licensed and insured electrical contractor based in Oregon City, serving residential and commercial clients across the Portland metro since 2005. Reach us at (503) 908-1593, see our commercial electrical services page, or see every city we serve.
Keep looking: All commercial electrical services, Commercial electrical services in Portland, and Everything we do in Lake Oswego.